Description

Technical Parameters

Product Introduction

0.96 oled display

standardized products are available in white and blue, and other colors can be customized. They do not require a backlight, so they are low power, thin and light.

128x64 oled display

The most commonly used dot matrix of 0.96 OLED is 128*64, which is available in both horizontal and vertical screens. Under normal circumstances, the naming according to the dot matrix is relatively general. It is necessary to quickly find the screen by developing common sizes and dot matrix.

0.96 i2c oled display

refers to a 0.96 OLED with an I²C interface. The interface is usually I²C or SPI, which is convenient for connecting to microcontrollers (Arduino, ESP8266, STM32, Raspberry Pi, etc.). Sometimes it is also called 0.96 inch OLED display Arduino I2C

0.96 oled display Parameter (specification)

Module Size ：27.0×28.55×3.2(MAX)	LCD AA :23.74×12.86(V)MM
LCD size:0.96 inch	Resolution :128(RGB)x64 pixel
Driver IC:NV3023B	Backlight Driver type：Power/+3.3V/HITE
Interface : 4W/4 SPI	Backlight :White LED

PIN	SYMBOL
1	GND
2	VCC
3	SCL
4	SDA

0.96 Tft Display Similar products

FAQ

Q: What is the resolution of a 0.96 OLED display?

A: The most widely used is 128*64, while some products use 128*32.

Q: What are the commonly used driver ICs for 0.96-inch OLEDs?

A: The most common are the SSD1306 and SH1106. Their driver compatibility varies, so be mindful of these differences when choosing.

Q: What's the difference between I²C and SPI interfaces for 0.96 OLED screens?

A: I²C has only two data lines, making transmission slower, but it saves space.
SPI: 4-7 data lines, faster.

Hot Tags: 0.96 oled display, China 0.96 oled display manufacturers, suppliers, factory, 122x32 Graphic LCD COG LCD, LED Signs LED Backlight, 40x2 LCD Display, touchscreen oled lcd, Two digit Seven Segement LED, 0802 LCD Display