1.product Picture









2.Product feature

High-precision display
The Three-digit 7 Segment LED adopts a seven-segment design, which can clearly and accurately display the numbers 0-9 by precisely controlling the on and off status of each segment of LED. Secondly, our character height and width are optimized to ensure good readability even at a long distance or in a dimly lit environment.
Long service life
Our products use high-quality LED chips as light sources, which have good reliability and stability. Its service life is more than 50,000 hours, which is dozens of times that of ordinary bulbs.
Excellent waterproof performance
Our products adopt IP65 waterproof standards. Through fine manufacturing processes, a tight waterproof layer is formed between the outer shell and the internal circuit of the LED display, effectively preventing moisture penetration. Secondly, the brightness of our products can reach 1500-2000mcd, which can provide stable display effects outdoors or in harsh environments.
Easy to integrate
Our products support a variety of interfaces and communication protocols, such as SPI, I2C, etc., which are convenient for integration with microcontrollers, single-chip microcomputers, etc. The control and management of the display can be achieved through simple programming and configuration.
Electronic instruments
Such as voltmeters, ammeters, thermometers, etc., require accurate digital display.
Timers and countdown timers
Such as timing control systems for industrial equipment.
Counters
In production lines or traffic management, used to display counting informatioreal-time time.
Consumer electronics
Such as electronic clocks, kitchen timers, etc., provide clear time display.

4.product Parameter (specification)
|
1. MODEL NUMBER:CX238S-U |
|
|
2. MODEL SIZE:22.5*10*6.0mm |
3. LED COLOR:RED(CUSTOMIZE) |
|
8 .OPERATING TEMP:-10°C TO +60°C |
9. STORAGE TEMP: -20°C TO +70°C |
Customer Service

FAQ
Q: What is a Three-Digit 7 Segment LED?
A: A Three-Digit 7 Segment LED display consists of three sets of seven individual LED segments that can be illuminated in different combinations to display numbers from 0 to 9. It is commonly used for digital clocks, calculators, and various electronic devices.
Q: How does a 7 Segment LED display work?
A: A 7 Segment LED display works by illuminating specific segments of the display to form different numerical digits. Each segment is a small LED, and the segments are arranged in a figure-eight pattern to display numbers by turning on the appropriate segments.
Q: What are the components of a Three-Digit 7 Segment LED?
A: A Three-Digit 7 Segment LED consists of 21 individual segments (7 segments per digit, 3 digits in total). The segments are arranged as follows: a, b, c, d, e, f, g. Each digit is controlled by a combination of electrical signals that turn on specific LEDs.
Q: What are the applications of a Three-Digit 7 Segment LED display?
A: Three-Digit 7 Segment LED displays are used in various applications, including digital clocks, thermometers, voltmeters, speedometers, calculators, and other electronic devices that require numerical output.
Q: How is the brightness of a 7 Segment LED controlled?
A: The brightness of a 7-segment LED can be controlled by adjusting the current flowing through the LEDs. This is typically done using a resistor or a pulse-width modulation (PWM) technique to regulate the voltage and current supplied to the LED segments.
Q: What is the difference between common anode and common cathode 7 Segment LEDs?
A: In a common anode 7 Segment LED, the anodes of all the segments are connected to a common pin, and the segments are lit by applying a low voltage to the corresponding cathode. In a common cathode display, the cathodes of all segments are connected to a common pin, and the segments light up by applying a high voltage to the corresponding anode.
Q: What type of circuit is needed to drive a Three-Digit 7 Segment LED?
A: A Three-Digit 7 Segment LED display requires a multiplexed driving circuit. Since each digit shares common pins (anode or cathode), the microcontroller or driver circuits must rapidly switch between the digits to display each digit in turn without flickering. This is usually done using transistors or dedicated display drivers.
Q: What is multiplexing in the context of 7 Segment LEDs?
A: Multiplexing refers to the technique of rapidly switching between the individual digits of a 7 Segment LED display. Each digit is turned on for a brief period, and by cycling through all the digits very quickly, the human eye perceives them as constantly lit.
Q: What are some advantages of using Three-Digit 7 Segment LED displays?
A: Advantages include clear, easy-to-read numerical displays, low power consumption, simplicity in design, and relatively low cost. They are also durable and can be used in a variety of applications such as clocks, meters, and counters.
Q: What are the typical voltage and current specifications for Three-Digit 7 Segment LEDs?
A: Typically, 7 Segment LEDs operate at a forward voltage of 1.8V to 3.2V (depending on the color of the LED) and a current of around 20mA per segment. However, the exact specifications can vary depending on the manufacturer and model.
Hot Tags: Three-digit 7 Segment LED, China Three-digit 7 Segment LED manufacturers, suppliers, factory, 7 segment led for ultraviolet devices










