There are many ways to remove the protection of the LCD display module, depending on the type of protection and the device. Here are some common methods:
To remove the protection of the car's central control screen, you can try to press and hold the power button on the lower left of the central control screen until the Volkswagen logo appears on the screen and then try to restart. If you cannot restart by pressing and holding the screen, you can try to lock the car and put it into sleep mode: lock the car for 10 minutes, keep the key 20 meters away from the car, and then start the car1.
For the removal of the protection of the liquid crystal display (LCD), the methods include:
Remove the protection by connecting the pins of the chip SCP to the ground. A typical example is the 15th pin of BA9741/TL14512.
Remove or disconnect the pins of the chip OLP to remove the protection. A typical example is the 4th pin of BIT3105/BIT31072.
Remove the external voltage divider capacitor of the chip overvoltage protection pin to remove the protection. A typical example is the 7th pin of OZ9RR/OZ99302.
To cancel the computer screen saver, you can do it in the following ways:
Cancel the screen saver through the control panel. In the Windows operating system, click [Start] in the lower left corner, and then select [Control Panel] in the pop-up menu, find and click [Appearance and Personalization] in the control panel, click [Screen Saver], select [None] as the screen saver, and then click the [Apply] and [OK] buttons to save setting 3.
Cancel the screen saver through the system settings. If your computer is win10 or higher, you can directly click [Start] in the lower left corner, and then click the gear-shaped [Settings] icon, enter the system settings, in the system settings, click [Personalization], select [Lock Screen Interface] on the left, find [Screen Saver Settings] in the lock screen interface settings, click to enter and select [None] as the screen saver, and then click the [Apply] and [OK] buttons to save setting 3.
Cancel the screen saver through the Group Policy Editor. Search for [Group Policy Editor] in the [Start] menu and open it. In the Group Policy Editor, expand [User Configuration], [Administrative Templates], [Control Panel], [Personalization], and then find [Enable Screen Saver], double-click the [Enable Screen Saver] option, select [Disabled] in the pop-up window, and then click [Apply] and [OK].
These methods are applicable to the removal of LCD display module protection in different devices and scenarios.







